- Notes, cautions, and warnings
- Working on your computer
- Disassembly and reassembly
- Recommended Tools
- System Overview
- Removing the Power Supply Unit - PSU
- Installing the Power Supply Unit - PSU
- Removing the Computer Cover
- Installing the Computer Cover
- Removing the PSU Card
- Installing the PSU Card
- Removing the Front Bezel
- Installing the Front Bezel
- Removing the Slim Line Optical Drive
- Installing the Slim Line Optical Drive
- Removing the Hard Drive
- Installing the Hard Drive
- Removing the Speaker
- Installing the Speaker
- Removing the HDD Thermal Sensor
- Installing the HDD Thermal Sensor
- Removing the Input-Output Panel
- Installing the Input-Output Panel
- Removing the Memory Shroud
- Installing the Memory Shroud
- Removing the Memory
- Installing the Memory
- Removing the Coin-Cell Battery
- Installing the Coin-Cell Battery
- Removing the PCI Card
- Installing the PCI Card
- Removing the PCIe-Card Retention
- Installing the PCIe card retention
- Removing the System-Fan Assembly
- Installing the System-Fan Assembly
- Removing the Heatsink Assembly
- Installing the Heatsink Assembly
- Removing the Heatsink Fan
- Installing the Heatsink Fan
- Removing the Processor
- Installing the Processor
- System Board Components
- Removing the System Board
- Installing the System Board
- Additional Information
- System setup
- Diagnostics
- Troubleshooting your computer
- Technical Specifications
- Contacting Dell
Dell Precision Tower 5810 Owner's Manual
Installing the Slim Line Optical Drive
- Lift the release latch, and slide the optical-drive cage inside the compartment.
- Press on the clasp to release the latch and thread the cables into the holder.
- Connect the power cable to the back of the optical drive.
- Connect the data cable to the back of the optical drive.
- Install the computer cover.
- Follow the procedures in After Working Inside Your Computer.
Geef een beoordeling (1-5 sterren).
Geef een beoordeling (1-5 sterren).
Geef een beoordeling (1-5 sterren).
Selecteer of het artikel nuttig is of niet.
Opmerkingen mogen geen speciale tekens bevatten: <>() \