Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

RACADM Command Options

The following table lists the options for the RACADM command:

Option	Description

-r <racIpAddr> -r <racIpAddr> : <port number>	Specifies the controller’s remote IP address. Use `<port number>` if the iDRAC port number is not the default port (443).
`-u <username>`	Specifies the user name that is used to authenticate the command transaction. If the `-u` option is used, the `-p` option must be used, and the `-i` option (interactive) is not allowed.
`-p <password>`	Specifies the password used to authenticate the command transaction. If the `-p` option is used, the `-i` option is not allowed.
`-S`	Specifies that RACADM must check for invalid certificate errors. RACADM stops the execution of the command with an error message if it detects an invalid certificate.
`--nocertwarn`	Does not display certificate related warning message.

NOTE: Up to four instances of remote RACADM can be executed on a management station, while only one instance of local RACADM can be executed on a managed node.