Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

clrsel

Description	Removes all the existing records from the System Event Log (SEL). To use this subcommand, you must have Clear Logs permission.
Synopsis	racadm clrsel [-m <module>]
Input	`-m <module>` must be one of the following values: `server-<n> —` where n=1 to 16 `server-<nx> —` where n=1 to 8; x = a,b,c,d (lower case)
Example	racadm clrsel The SEL was cleared successfully. Clear SEL log on server 1: racadm clrsel -m server-1