Alienware Command Center 6.x User's Guide

Creating an Overclocking Thermal Preset

The option to create an overclocking custom preset is available only on systems that support the overclocking feature. Custom preset can only be configured and applied in system mode.

About this task

To create a CUSTOM preset, do the following:

Steps

Switch the screen to the PERFORMANCE view.
Figure 1. Performance
ADVANCED VIEW tab is added for those components that support Advanced settings.
Click ADVANCED VIEW tab.
Figure 2. Advanced View
Click TEST & SAVE after making changes.
Figure 3. Test & Save
The system starts testing the new configuration.
Figure 4. Testing the new configuration
After testing, click Save to apply changes or Cancel to return to editing.
Figure 5. Save & Cancel
Click Revert to remove all changes.
NOTE:A message is displayed stating that the changes were not saved when you add some changes but did not test and save them.
Figure 6. Message displayed when changes are added without testing and saving them

Welkom

Welkom bij Dell

Alienware Command Center 6.x User's Guide

Creating an Overclocking Thermal Preset

About this task

Steps

Beoordeel deze inhoud