Dell Precision Workstation T5610 Owner's Manual

Installing the System Board

1. Align the system board to the port connectors on the back of the chassis and place the system board in the chassis.
2. Tighten the screws to secure the system board to the chassis.
3. Connect the cables to the system board.
4. Install:
   1. processor
   2. memory module(s)
   3. coin-cell battery
   4. heatsink fan
   5. heatsink
   6. speaker
   7. I/O panel
   8. PCI card
   9. PSU card
   10. system fan
   11. hard drive
   12. optical drive
   13. thermal sensor
   14. cover
   15. power supply unit (PSU)
5. Follow the procedures in After Working Inside Your Computer.