- Notes, cautions, and warnings
- Notes, cautions, and warnings
- Working on Your Computer
- Removing and Installing Components
- Recommended Tools
- System Overview
- Removing the Power Supply Unit (PSU)
- Installing the Power Supply Unit (PSU)
- Removing the Cover
- Installing the Cover
- Removing the Front Bezel
- Installing the Front Bezel
- Removing the PCI Card
- Installing the PCI Card
- Removing the Optical Drive
- Installing the Optical Drive
- Removing the Hard Drive
- Installing the Hard Drive
- Removing the Thermal Sensor
- Installing the Thermal Sensor
- Removing the Input/Output (I/O) Panel
- Installing the Input/Output (I/O) Panel
- Removing the Air Tunnel
- Installing the Air Tunnel
- Removing the Memory
- Installing the Memory
- Removing the Coin-Cell Battery
- Installing the Coin-Cell Battery
- Removing the Heatsink
- Installing the Heatsink
- Removing the Heatsink Fan
- Installing the Heatsink Fan
- Removing the Processor
- Installing the Processor
- Removing the System Fan
- Installing the System Fan
- Removing the PSU Card
- Installing the PSU Card
- Removing the Speaker
- Installing the Speaker
- Removing the System Board
- Installing the System Board
- System Board Components
- Additional Information
- System Setup
- Diagnostics
- Troubleshooting Your Computer
- Technical Specifications
- Contacting Dell
Dell Precision Workstation T5610 Owner's Manual
Installing the Front Bezel
- Insert the hooks along the bottom edge of the front panel into the slots on the chassis front.
- Rotate the bezel towards the computer to engage the front-bezel retention clips until they click into place.
- Install the cover.
- Follow the procedures in After Working Inside Your Computer.
평점(별 1~5개)을 매겨주십시오.
평점(별 1~5개)을 매겨주십시오.
평점(별 1~5개)을 매겨주십시오.
문서가 도움이 되었는지 여부를 선택하십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.