Dell PowerEdge R730 Owner's Manual

Removing the power supply unit blank

Install the power supply unit (PSU) blank only in the second PSU bay.

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Follow the safety guidelines listed in the Safety instructions section.

Steps

If you are installing a second power supply unit (PSU), remove the PSU blank in the bay by pulling the blank outward.

CAUTION: To ensure proper system cooling, the PSU blank must be installed in the second PSU bay in a non-redundant configuration. Remove the PSU blank only if you are installing a second PSU.

This figure shows removing the PSU blank. — Figure 1. Removing the PSU blank

Next steps

Install the PSU or PSU blank.

환영

환영합니다.

Dell PowerEdge R730 Owner's Manual

Removing the power supply unit blank

Prerequisites

Steps

Next steps

본 콘텐츠를 평가해주십시오.