메인 콘텐츠로 이동
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스

Dell PowerEdge R630 Owner's Manual

Troubleshooting iDRAC Direct - USB XML configuration

For information about USB storage device and system configuration, see Integrated Dell Remote Access Controller User's Guide at www.dell.com/poweredgemanuals

Steps

  1. Ensure that your USB storage device is connected to the front USB Management Port, identified by iDRAC Direct icon icon.
  2. Ensure that your USB storage device is configured with an NTFS or an FAT32 file system with only one partition.
  3. Verify that the USB storage device is configured correctly. For more information about configuring the USB storage device, see Integrated Dell Remote Access Controller User's Guide at www.dell.com/poweredgemanuals
  4. In the iDRAC Settings Utility, ensure that USB Management Port Mode is configured as Automatic or iDRAC Direct Only.
  5. Ensure that the iDRAC Managed: USB XML Configuration option is either Enabled or Enabled only when the server has default credential settings.
  6. Remove and reinsert the USB storage device.
  7. If import operation does not work, try with a different USB storage device.

Next steps

If all troubleshooting fails, see the Getting help section.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.