Dell Precision 7920 Tower Owner's Manual

Removing the NVMe Flexbay

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. side cover
      NOTE:Do not remove the side cover, if the front I/O bezel is unlocked.
   2. HDD bezel
      NOTE:Remove only the HDD bezel.
3. To remove the NVMe flexbay :
   1. Press the release button [1] to unlock the latch [2].
      
   2. Pull the latch to slide the carrier out of the HDD slot.
      
4. To remove the SSD carrier from the NVMe flexbay:
   1. Press the release button to slide the M.2 SSD carrier out of the NVMe flexbay.
      
   2. Pull the M.2 SSD carrier out of the NVMe flexbay.
      
5. To remove the SSD from the SSD carrier:
   1. Remove the screws on either side of the SSD.
      
   2. Remove the screw from the top of the SSD carrier.
      
   3. Slide the SSD cover from the top of the carrier.
      
   4. Slide the SSD out of the M.2 slot on the carrier.
      

      NOTE:For more information on detailed parts requirement in upgrade scenarios refer to, KB Article Number: and 000146243.