Dell PowerEdge R760 Installation and Service Manual

Removing a memory module

Prerequisites

Follow the safety guidelines listed in the Safety instructions.
Follow the procedure listed in Before working inside your system.
Remove the air shroudor remove the GPU air shroud.

WARNING:The memory modules are hot to touch for some time after the system has been powered off. Allow the memory modules to cool before handling them.

NOTE:To ensure proper system cooling, memory module blanks must be installed in any memory socket that is not populated. The memory module blanks compatible with the R760 are DDR5 gray color blanks. Remove the memory module blanks only if you intend to install memory module in these sockets.

Steps

Locate the appropriate memory module socket.
To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module socket to fully open.
CAUTION: Handle each memory module only by the card edges, ensuring not to touch the middle of the memory module or metallic contacts.
Lift the memory module away from the system.
Figure 1. Removing a memory module

Next steps

Replace the memory module.

환영

환영합니다.

Dell PowerEdge R760 Installation and Service Manual

Removing a memory module

Prerequisites

Steps

Next steps

본 콘텐츠를 평가해주십시오.