메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Dell PowerEdge R760 Installation and Service Manual

PDF

LCD panel

The LCD panel provides system information, status, and error messages to indicate if the system is functioning correctly or requires attention. The LCD panel is used to configure or view the iDRAC IP address of the system. For information about the event and error messages generated by the system firmware and agents that monitor system components, go to qrl.dell.com > Look Up > Error Code, type the error code, and then click Look it up..

The LCD panel is available only on the optional front bezel. The optional front bezel is hot pluggable.

The status and conditions of the LCD panel are outlined here:

  • The LCD backlight is white during normal operating conditions.
  • If there is an issue, the LCD backlight turns amber and displays an error code followed by descriptive text.
    NOTE:If the system is connected to a power source and an error is detected, the LCD turns amber regardless of whether the system is powered on or off.
  • When the system powers off and there are no errors, the LCD enters the standby mode after five minutes of inactivity. Press any button on the LCD to power it on.
  • If the LCD panel stops responding, remove the bezel and reinstall it.

    If the problem persists, see Getting help.

  • The LCD backlight remains off if LCD messaging is powered off using the iDRAC utility, the LCD panel, or other tools.
Figure 1. LCD panel features
This image shows LCD panel features.
Table 1. LCD panel featuresThe table describes the LCD panel buttons: Left, Select and Right, and their functions.
Item Button or display Description
1 Left Moves the cursor back in one-step increments.
2 Select Selects the menu item highlighted by the cursor.
3 Right Moves the cursor forward in one-step increments.

During message scrolling:

  • Press and hold the right button to increase scrolling speed.
  • Release the button to stop.
NOTE:The display stops scrolling when the button is released. After 45 seconds of inactivity, the display starts scrolling.
4 LCD display Displays the system information, status, and error messages or iDRAC IP address.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.