Integrated Dell Remote Access Controller 7 (iDRAC7) Version 1.50.50 User's Guide

Example:

The following example describes how to add a new user named "John" with a "123456" password and LOGIN privileges to the RAC.

racadm config -g cfgUserAdmin -o cfgUserAdminUserName -i 3 john

racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 3 123456

racadm config -g cfgUserAdmin -i 3 -o cfgUserAdminPrivilege 0x00000001

racadm config -g cfgUserAdmin -i 3 -o cfgUserAdminIpmiLanPrivilege 2

racadm config -g cfgUserAdmin -i 3 -o cfgUserAdminIpmiSerialPrivilege 2

racadm config -g cfgUserAdmin -i 3 -o cfgUserAdminSolEnable 1

racadm config -g cfgUserAdmin -i 3 -o cfgUserAdminEnable 1

To verify, use one of the following commands:

racadm getconfig -u john

racadm getconfig –g cfgUserAdmin –i 3

For more information on the RACADM commands, see the RACADM Command Line Reference Guide for iDRAC7 and CMC available at dell.com/support/manuals.