- Notes, cautions, and warnings
- Overview
- Built in iDRAC and PowerEdge Security
- Securely Configuring iDRAC Web Server
- Securely Using TLS/SSL Certificate
- Federal Information Processing Standards (FIPS)
- Secure Shell (SSH)
- Network Security Configuration
- Interfaces and Protocols to Access iDRAC
- iDRAC Port Configuration
- IPMI and SNMP Security Best Practices
- Secure Enterprise Key Manager (SEKM) Security
- iDRAC9 Group Manager
- Virtual Console and Virtual Media Security
- VNC Security
- User Configuration and Access Control
- Configuring Local Users
- Disabling Access to Modify iDRAC Configuration Settings on Host System
- iDRAC User Roles and Privileges
- Superroot User
- Recommended Characters in Usernames and Passwords
- Password Strength Policy
- Secure Default Password
- Changing the Default Login Password using Web Interface
- Force Change of Password (FCP)
- Simple 2-Factor Authentication (Simple 2FA)
- RSA SecurID Two Factor Authentication (2FA) iDRAC9 Datacenter
- Active Directory
- LDAP
- Customizable Security Banner
- System Lockdown Mode
- Securely Configuring BIOS System Security
- Secure Boot Configuration
- Securely Erasing Data
- LCD Panel
- Server Inventory, Lifecycle Log, Server Profiles, and Licenses Import and Export
- Security Events Lifecycle Log
- Default Configuration Values
- Network Vulnerability Scanning
- Security Licensing
- Field Service Debug (FSD)
- Best Practices
- Appendix - White papers
iDRAC9 Security Configuration Guide
Enabling HTTPS Redirection
HTTP to HTTPS redirection redirects webserver communication from HTTP port (default is 80) to HTTPS port (default is 443). This ensures that only secure encrypted connections are established when clients connect to iDRAC using remote RACADM, Redfish, WS-Man, or iDRAC GUI. HTTPS redirection is enabled by default.
NOTE:This setting does not affect established connections. A user must have Configure iDRAC privilege to enable or disable HTTPS redirection and the user must log out and log in to iDRAC for this setting to take effect. When you disable this feature, a warning message is displayed, and an event is recorded in the Lifecycle Controller log file when this feature is enabled or disabled.
Use the following RACADM command to enable HTTP to HTTPS redirection, in case it has been disabled:
racadm set iDRAC.Webserver.HttpsRedirection Enabled
평점(별 1~5개)을 매겨주십시오.
평점(별 1~5개)을 매겨주십시오.
평점(별 1~5개)을 매겨주십시오.
문서가 도움이 되었는지 여부를 선택하십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.