메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Integrated Dell Remote Access Controller 9 Version 3.15.15.15 User's Guide

PDF

Switching the controller mode

NOTE:Switching the controller mode is not supported for PERC 10 controllers.
On PERC 9.1 controllers, you can change the personality of the controller by switching the mode from RAID to HBA. The controller operates similar to a HBA controller where the drivers are passed through the operating system. The controller mode change is a staged operation and does not occur in real time. Before you change the mode of the controller from RAID to HBA, ensure that:
  • The RAID controller supports the controller mode change. The option to change the controller mode is not available on controllers where the RAID personality requires a license.
  • All virtual disks must be deleted or removed.
  • Hot spares must be deleted or removed.
  • Foreign configurations must be deleted or cleared.
  • All physical disks that are in a failed state, must be removed or the pinned cache needs to be cleared.
  • Any local security key associated with SEDs must be deleted.
  • The controller must not have preserved cache.
  • You have server control privileges to switch the controller mode.
NOTE:Ensure that you back up the foreign configuration, security key, virtual disks, and hot spares before you switch the mode as the data is deleted.
NOTE:Ensure that a CMC license is available for PERC FD33xS and FD33xD storage sleds before you change the controller mode. For more information on CMC license for the storage sleds, see the Dell Chassis Management Controller Version 1.2 for PowerEdge FX2/FX2s User's Guide available at www.dell.com/support.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.