메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Integrated Dell Remote Access Controller 9 Version 3.15.15.15 User's Guide

PDF

Configuring multiple iDRACs using RACADM

You can configure one or more iDRACs with identical properties using RACADM. When you query a specific iDRAC using its group ID and object ID, RACADM creates a configuration file from the retrieved information. Import the file to other iDRACs to identically configure them.
NOTE:
  • The configuration file contains information that is applicable for the particular server. The information is organized under various object groups.
  • Some configuration files contain unique iDRAC information, such as the static IP address, that you must modify before you import the file into other iDRACs.

You can also use the System Configuration Profile (SCP) to configure multiple iDRACs using RACADM. SCP file contains the component configuration information. You can use this file to apply the configuration for BIOS, iDRAC, RAID, and NIC by importing the file into a target system. For more information, see XML Configuration Workflow white paper available at www.dell.com/manuals.

To configure multiple iDRACs using the configuration file:

  1. Query the target iDRAC that contains the required configuration using the following command:. 
    racadm get -f <file_name>.xml -t xml -c iDRAC.Embedded.1

    The command requests the iDRAC configuration and generates the configuration file.

    NOTE:Redirecting the iDRAC configuration to a file using get -f is only supported with the local and remote RACADM interfaces.
    NOTE:The generated configuration file does not contain user passwords.

    The get command displays all configuration properties in a group (specified by group name and index) and all configuration properties for a user.

  2. Modify the configuration file using a text editor, if required.
    NOTE:It is recommended that you edit this file with a simple text editor. The RACADM utility uses an ASCII text parser. Any formatting confuses the parser, which may corrupt the RACADM database.
  3. On the target iDRAC, use the following command to modify the settings: 
    racadm set -f <file_name>.xml -t xml
    This loads the information into the other iDRAC. You can use set command to synchronize the user and password database with Server Administrator.
  4. Reset the target iDRAC using the command: racadm racreset

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.