메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2

PDF

TST Event Messages

TST100

Message
The operation was successful.
Detailed Description
The operation completed successfully.
Recommended Response Action
No response action is required.
Category
Configuration (TST = Test Alert)
Severity
Severity 3 (Informational)
No alerts are applicable for this message

TST101

Message
Resource allocation failure.
Detailed Description
The operation did not complete successfully because of lack of memory or file space in the iDRAC firmware.
Recommended Response Action
Reset the iDRAC and retry the operation.
Category
Configuration (TST = Test Alert)
Severity
Severity 1 (Critical)
No alerts are applicable for this message

TST102

Message
Email alert destination address not configured.
Detailed Description
The destination address of the email is not configured.
Recommended Response Action
Configure the email alert destination address and retry the operation.
Category
Configuration (TST = Test Alert)
Severity
Severity 2 (Warning)
No alerts are applicable for this message

TST103

Message
Missing parameters arg1
Arguments
arg1 = parameter names
Detailed Description
One or more required parameters needed for the operation are missing.
Recommended Response Action
To provide the correct parameters, see Lifecycle Controller-Remote Services documentation.
Category
Configuration (TST = Test Alert)
Severity
Severity 2 (Warning)
No alerts are applicable for this message

TST104

Message
SNMP traps not configured.
Detailed Description
The SNMP trap being tested is not properly configured.
Recommended Response Action
Configure the SNMP trap and retry the operation. If the issue persists, reset iDRAC.
Category
Configuration (TST = Test Alert)
Severity
Severity 2 (Warning)
No alerts are applicable for this message

TST105

Message
Invalid parameter value for arg1 .
Arguments
arg1 = parameter name
Detailed Description
The value provided for the specified parameter is invalid.
Recommended Response Action
To provide the correct value for the specified parameter, see Lifecycle Controller-Remote Services documentation.
Category
Configuration (TST = Test Alert)
Severity
Severity 2 (Warning)
No alerts are applicable for this message

TST106

Message
Email alert destination address not configured.
Detailed Description
The email alert being tested is not properly configured.
Recommended Response Action
Configure the email alert and retry the operation. If the failure persists, reset iDRAC.
Category
Configuration (TST = Test Alert)
Severity
Severity 2 (Warning)
No alerts are applicable for this message

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.