- Notes, Cautions, and Warnings
- Introduction
- AMP Event Messages
- ASR Event Messages
- BAR Event Messages
- BAT Event Messages
- BIOS Event Messages
- BOOT Event Messages
- CBL Event Messages
- CMC Event Messages
- CPU Event Messages
- CPUA Event Messages
- CTL Event Messages
- DH Event Messages
- DIAG Event Messages
- DIS Event Messages
- DKM Event Messages
- ECM Event Messages
- ENC Event Messages
- EPP Event Messages
- FAN Event Messages
- FC Event Messages
- FCD Event Messages
- FLDC Event Messages
- FSD Event Messages
- HWC Event Messages
- IOID Event Messages
- IOV Event Messages
- IPA Event Messages
- ISM Event Messages
- JCP Event Messages
- LC Event Messages
- LIC Event Messages
- LNK Event Messages
- LOG Event Messages
- MEM Event Messages
- NIC Event Messages
- OSD Event Messages
- OSE Event Messages
- PCI Event Messages
- PDR Event Messages
- PFM Event Messages
- POW Event Messages
- PR Event Messages
- PST Event Messages
- PSU Event Messages
- PSUA Event Messages
- PWR Event Messages
- RAC Event Messages
- RDU Event Messages
- RED Event Messages
- RFL Event Messages
- RFLA Event Messages
- RFM Event Messages
- RRDU Event Messages
- RSI Event Messages
- SEC Event Messages
- SEL Event Messages
- SSD Event Messages
- STOR Event Messages
- SUP Event Messages
- SWC Event Messages
- SWU Event Messages
- SYS Event Messages
- TMP Event Messages
- TMPS Event Messages
- TST Event Messages
- UEFI Event Messages
- USR Event Messages
- VDR Event Messages
- VF Event Messages
- VFL Event Messages
- VFLA Event Messages
- VLT Event Messages
- VME Event Messages
- VRM Event Messages
Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2
TMP Event Messages
TMP0100
- Message
- The system board arg1 temperature is less than the lower warning threshold.
- Arguments
- arg1 = name
- Detailed Description
- Ambient air temperature is too cool.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 2162
TMP0101
- Message
- The system board arg1 temperature is less than the lower critical threshold.
- Arguments
- arg1 = name
- Detailed Description
- Ambient air temperature is too cool.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- System board temperature is outside of range. Check Fans
TMP0102
- Message
- The system board arg1 temperature is greater than the upper warning threshold.
- Arguments
- arg1 = name
- Detailed Description
- Ambient air temperature is too warm or one or more fans may have failed.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 2162
TMP0103
- Message
- The system board arg1 temperature is greater than the upper critical threshold.
- Arguments
- arg1 = name
- Detailed Description
- Ambient air temperature is too warm or one or more fans may have failed.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- System board temperature is outside of range. Check Fans
TMP0104
- Message
- The system board arg1 temperature is outside of range.
- Arguments
- arg1 = name
- Detailed Description
- Ambient air temperature is too warm or cool.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- System board <name> temperature is outside of range Check Fans
TMP0105
TMP0106
- Message
- The memory module arg1 temperature is less than the lower warning threshold.
- Arguments
- arg1 = number
- Detailed Description
- Ambient air temperature is too cool.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 2162
TMP0107
- Message
- The memory module arg1 temperature is less than the lower critical threshold.
- Arguments
- arg1 = number
- Detailed Description
- Ambient air temperature is too cool.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- Memory module <number> temperature is outside of range. Check Fans
TMP0108
- Message
- The memory module arg1 temperature is greater than the upper warning threshold.
- Arguments
- arg1 = number
- Detailed Description
- Ambient air temperature is too warm or one or more fans may have failed.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 2162
TMP0109
- Message
- The memory module arg1 temperature is greater than the upper critical threshold.
- Arguments
- arg1 = number
- Detailed Description
- Ambient air temperature is too warm or one or more fans may have failed.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- Memory module <number> temperature is outside of range. Check Fans
TMP0110
- Message
- The memory module arg1 temperature is outside of range.
- Arguments
- arg1 = number
- Detailed Description
- Ambient air temperature is too warm or cool.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- Memory module <number> temperature is outside of range. Check Fans
TMP0111
TMP0112
- Message
- The arg1 temperature is less than the lower warning threshold.
- Arguments
- arg1 = name
- Detailed Description
- Ambient air temperature is too cool.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 2162
TMP0113
- Message
- The arg1 temperature is less than the lower critical threshold.
- Arguments
- arg1 = name
- Detailed Description
- Ambient air temperature is too cool.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- The <name> temperature is outside of range. Check Fans
TMP0114
- Message
- The arg1 temperature is greater than the upper warning threshold.
- Arguments
- arg1 = name
- Detailed Description
- Ambient air temperature is too warm or one or more fans may have failed.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 2162
TMP0115
- Message
- The arg1 temperature is greater than the upper critical threshold.
- Arguments
- arg1 = name
- Detailed Description
- Ambient air temperature is too warm or one or more fans may have failed.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- The <name> temperature is outside of range . Check Fans
TMP0116
- Message
- The arg1 temperature is outside of range.
- Arguments
- arg1 = name
- Detailed Description
- Ambient air temperature is too warm or cool.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- The <name> temperature is outside of range. Check Fans
TMP0117
TMP0118
TMP0119
- Message
- The system inlet temperature is less than the lower critical threshold.
- Detailed Description
- Ambient air temperature is too cool.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- Inlet temperature is lower than critical threshold. Check environment
TMP0120
TMP0121
- Message
- The system inlet temperature is greater than the upper critical threshold.
- Detailed Description
- Ambient air temperature is too warm.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- Inlet temperature is greater than upper critical threshold. Check environment
TMP0122
- Message
- The system inlet temperature is outside of range.
- Detailed Description
- Ambient air temperature is too warm or cool.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- Inlet temperature is outside of range . Check environment
TMP0123
TMP0124
TMP0125
TMP0126
- Message
- Disk drive bay temperature is greater than the upper warning threshold.
- Detailed Description
- Ambient air temperature is too warm or one or more fans may have failed.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 2162
TMP0127
- Message
- Disk drive bay temperature is greater than the upper critical threshold.
- Detailed Description
- Ambient air temperature is too warm or one or more fans may have failed.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
TMP0128
- Message
- Disk drive bay temperature is outside of range.
- Detailed Description
- Ambient air temperature is too warm or cool.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
TMP0129
TMP0130
TMP0131
TMP0132
- Message
- The control panel temperature is greater than the upper warning threshold.
- Detailed Description
- Ambient air temperature is too warm or one or more fans may have failed.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 2162
TMP0133
- Message
- The control panel temperature is greater than the upper critical threshold.
- Detailed Description
- Ambient air temperature is too warm or one or more fans may have failed.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
TMP0134
- Message
- The control panel temperature is outside of range.
- Detailed Description
- Ambient air temperature is too warm or cool.
- Recommended Response Action
- Check system operating environment and review event log for fan failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
TMP0135
TMP0136
- Message
- The system is automatically turned off because of insufficient cooling.
- Detailed Description
- The system is automatically turned off because of insufficient cooling.
- Recommended Response Action
- Replace the fans that have stopped functioning, or add the mininum number of fans recommended. For more information, see the system Owners Manual available at the support site.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- Insufficient system cooling detected. Check fans
TMP0137
TMP0138
- Message
- The C1 Enhance (C1E) state is disabled in the server. Increased fan speeds can be expected during high CPU workload.
- Detailed Description
- Disabling the C1E state in servers with processors that have their Thermal Design Power (TDP) value set to equal to or greater than 155 Watt results in increased fan speed during high CPU workloads.
- Recommended Response Action
- No response action is required.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 3 (Informational)
TMP0200
- Message
- CPU arg1 temperature is less than the lower warning threshold.
- Arguments
- arg1 = number
- Detailed Description
- System performance may be degraded.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 2162
TMP0201
- Message
- CPU arg1 temperature is less than the lower critical threshold.
- Arguments
- arg1 = number
- Detailed Description
- System performance may be degraded.
- Recommended Response Action
- Check system operating environment.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- CPU <number> temperature is outside of range. Check fans
TMP0202
- Message
- CPU arg1 temperature is greater than the upper warning threshold.
- Arguments
- arg1 = number
- Detailed Description
- System performance may be degraded.
- Recommended Response Action
- Check system operating environment, fans, and heatsinks.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 2162
TMP0203
- Message
- CPU arg1 temperature is greater than the upper critical threshold.
- Arguments
- arg1 = number
- Detailed Description
- System performance may be degraded.
- Recommended Response Action
- Check system operating environment, fans, and heatsinks.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- CPU <number> temperature is outside of range. Check fans
TMP0204
- Message
- CPU arg1 temperature is outside of range.
- Arguments
- arg1 = number
- Detailed Description
- System performance may be degraded.
- Recommended Response Action
- Check system operating environment, fans, and heatsinks.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2161
- LCD Message
- CPU <number> temperature is outside of range. Check fans
TMP0205
TMP0300
- Message
- The Enhanced Cooling Mode feature is enabled.
- Detailed Description
- The Enhanced Colling Mode feature is enabled.
- Recommended Response Action
- No response action is required.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 3 (Informational)
- No alerts are applicable for this message
TMP0301
- Message
- The Enhanced Cooling Mode feature is disabled.
- Detailed Description
- The Enhanced Colling Mode feature is disabled.
- Recommended Response Action
- No response action is required.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 3 (Informational)
- No alerts are applicable for this message
TMP0302
- Message
- Unable to set Enhanced Cooling Mode because the required power or fan configuration is not available.
- Detailed Description
- The Enhanced Colling Mode feature cannot be enabled because the necessary power or fan configuration is not available.
- Recommended Response Action
- Do the following: 1) Check the available power and the fan configuration. 2) If the required power for Enahnced Cooling mode is not available, remove other chassis components which are not being used in order to obtain sufficient power. 3) If the fan configuration does not support Enhanced Cooling Mode, replace unsupported fans with supported ones. 4) If the issue persists, contact your service provider.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- No alerts are applicable for this message
TMP1000
- Message
- arg1 exceeded the maximum warning threshold.
- Arguments
- arg1 = tempsensor name
- Detailed Description
- The enclosure is too hot. A variety of factors can cause the excessive temperature. For example, a fan may have failed, the thermostat may be set too high, or the room temperature may be too hot.
- Recommended Response Action
- Check for factors that may cause overheating. For example, verify that the enclosure fan is working. You should check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot. Refer to the enclosure documentation for more diagnostic information.
- Category
- Storage (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 4210
- OMSA Event ID
- 2100
- OMSA Trap ID
- 105300
TMP1001
- Message
- arg1 has crossed the minimum warning threshold.
- Arguments
- arg1 = tempsensor name
- Detailed Description
- The enclosure is too cold.
- Recommended Response Action
- Check whether the thermostat setting is too low and whether the room temperature is too cool.
- Category
- Storage (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 4210
- OMSA Event ID
- 2101
- OMSA Trap ID
- 105300
TMP1002
- Message
- arg1 has exceeded the maximum failure threshold.
- Arguments
- arg1 = tempsensor name
- Detailed Description
- The enclosure is too hot. A variety of factors can cause the excessive temperature. For example, a fan may have failed, the thermostat may be set too high, or the room temperature may be too hot.
- Recommended Response Action
- Check for factors that may cause overheating. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot. Refer to the enclosure documentation for more diagnostic information.
- Category
- Storage (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4209
- OMSA Event ID
- 2102
- OMSA Trap ID
- 105400
TMP1003
- Message
- arg1 has crossed the minimum failure threshold.
- Arguments
- arg1 = tempsensor name
- Detailed Description
- The enclosure is too cold.
- Recommended Response Action
- Check whether the thermostat setting is too low and whether the room temperature is too cool.
- Category
- Storage (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4209
- OMSA Event ID
- 2103
- OMSA Trap ID
- 105400
TMP1004
- Message
- The temperature sensor arg1 is now within configured threshold values.
- Arguments
- arg1 = temperature sensor name
- Detailed Description
- The enclosure temperature sensor identified in the message is operating within the upper and lower configured temperature thresholds.
- Recommended Response Action
- No response action is required.
- Category
- Storage (TMP = Temperature)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4211
TMP5
- Message
- The temperature probe maximum warning value was changed on arg1 .
- Arguments
- arg1 = Enclosure name
- Detailed Description
- You have changed the value for the maximum temperature probe warning threshold. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (TMP = Temperature)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4211
- OMSA Event ID
- 2154
- OMSA Trap ID
- 105100
TMP500
- Message
- The arg1 sensor has failed with value the arg2 degrees Celsius.
- Arguments
- arg1 = sensor name, arg2 = temperature
- Detailed Description
- A temperature sensor identified in the message has failed. This condition can cause system performance issues and degradation in the moitoring capability of the system.
- Recommended Response Action
- Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. For more information, contact your service provider.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- OMSA Event ID
- 5050
TMP501
- Message
- Unable to read the arg1 sensor value.
- Arguments
- arg1 = sensor name
- Detailed Description
- A temperature sensor identified in the message has failed. This condition can cause system performance issues and degradation in the moitoring capability of the system.
- Recommended Response Action
- Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. For more information, contact your service provider.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- OMSA Event ID
- 5051
TMP502
- Message
- The arg1 sensor has returned to a normal state with a value of arg2 degrees Celsius.
- Arguments
- arg1 = sensor name, arg2 = temperature
- Detailed Description
- The sensor identified in the message has returned to a normal state.
- Recommended Response Action
- No response action is required.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 3 (Informational)
- OMSA Event ID
- 5052
- OMSA Trap ID
- 5052
TMP503
- Message
- The arg1 sensor state has changed to a warning state with a value of arg2 degrees Celsius.
- Arguments
- arg1 = sensor name, arg2 = temperature
- Detailed Description
- The temperature sensor identified in the message is faulty, or the temperature exceeds the warning threshold. This condition can cause system performance issues and degradation in the moitoring capability of the system.
- Recommended Response Action
- Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. For more information, contact your service provider. Otherwise, change the warning threshold for the temperature sensor (if applicable) such that it corresponds to the hardware configuration.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 2 (Warning)
- OMSA Event ID
- 5053
- OMSA Trap ID
- 5053
TMP504
- Message
- The arg1 sensor has detected an error with a value of arg2 degrees Celsius.
- Arguments
- arg1 = sensor name, arg2 = temperature
- Detailed Description
- The temperature sensor identified in the message is faulty, or the temperature exceeds the critical threshold. This condition can cause system performance issues and degradation in the moitoring capability of the system.
- Recommended Response Action
- Review system power policy, check system logs for temperature related failures.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- OMSA Event ID
- 5054
- OMSA Trap ID
- 5054
TMP505
- Message
- The arg1 sensor has failed with a value of arg2 degrees Celsius.
- Arguments
- arg1 = sensor name, arg2 = temperature
- Detailed Description
- The temperature sensor identified in the message has failed.
- Recommended Response Action
- Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. For more information, contact your service provider.
- Category
- System Health (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- OMSA Event ID
- 5055
- OMSA Trap ID
- 5055
TMP6
- Message
- The temperature probe minimum warning value was changed on arg1 .
- Arguments
- arg1 = Enclosure name
- Detailed Description
- You have changed the value for the minimum temperature probe warning threshold. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (TMP = Temperature)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4211
- OMSA Event ID
- 2155
- OMSA Trap ID
- 105100
TMP7
- Message
- arg1 has failed.
- Arguments
- arg1 = Temp Sensor Name
- Detailed Description
- A device has been failed and the system is no longer functioning in optimal condition.
- Recommended Response Action
- Replace the device.
- Category
- Storage (TMP = Temperature)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4209
TMP8500
- Message
- I/O Module arg1 temperature exceeded operating range.
- Arguments
- arg1 = iom slot name
- Detailed Description
- The temperature of the I/O Module identified in the message has increased beyond the operational range. Thermal protection shut down the I/O Module. Factors external to the I/O Module may have caused this situation.
- Recommended Response Action
- Check the chassis event log for fan issues and fix any issues present. If no fan issues are detected, check chassis ambient temperature and make sure the temperature is within operating range. Utilize the RACADM command "racadm getsensorinfo" to check the chassis ambient temperature.
- Category
- Audit (TMP = Temperature)
- Severity
- Severity 1 (Critical)
TMP8501
- Message
- Unable to read planar board temperature sensors. The cooling has been increased to safeguard the system.
- Detailed Description
- System was unable to read planar board or control panel temperature sensors. The fan speed was increased to protect system hardware.
- Recommended Response Action
- Remove AC power from the system and reapply AC power. Check to see if the issue is resolved. If the issue persists, contact your service provider.
- Category
- Audit (TMP = Temperature)
- Severity
- Severity 2 (Warning)
TMP8502
- Message
- Able to read planar board temperature sensors. Cooling set for normal chassis operation.
- Detailed Description
- The system has recovered from being unable to read planar board or control panel temperature sensors.
- Recommended Response Action
- No response action required.
- Category
- Audit (TMP = Temperature)
- Severity
- Severity 3 (Informational)
평점(별 1~5개)을 매겨주십시오.
평점(별 1~5개)을 매겨주십시오.
평점(별 1~5개)을 매겨주십시오.
문서가 도움이 되었는지 여부를 선택하십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.