Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2

PFM0001

Message: The value of arg1 is greater than the upper critical threshold.
Arguments: arg1 = sensor name
Detailed Description: The utilization value of the sensor identified in the message is higher than the upper critical threshold.
Recommended Response Action: Check the work load of the server and reduce the workload if necessary to bring the system performance into required ranges. For more information about the specified values, see the relevant product documentation available at the support site.
Category: System Health (PFM = System Performance Event)
Severity: Severity 1 (Critical)
: No alerts are applicable for this message

Message: The value of arg1 is greater than the upper warning threshold.
Arguments: arg1 = sensor name
Detailed Description: The utilization value of the sensor identified in the message is higher than the upper warning threshold.
Recommended Response Action: Check the work load of the server and reduce the workload if necessary to bring the system performance into required ranges. For more information about the specified values, see the relevant product documentation available at the support site.
Category: System Health (PFM = System Performance Event)
Severity: Severity 2 (Warning)
Trap/EventID: 2650

	Filter Visibility	IPMI Alert	SNMP Alert	Email Alert	Remote System Log	WS Eventing
iDRAC	✔	✔*	✔	✔	✔	✔
CMC

	LC Log	LCD	OS Log	Power Off	Power Cycle	Reset	Chassis Event Proxy
iDRAC	✔*		✔
CMC

Message: The value of arg1 is less than the lower warning threshold.
Arguments: arg1 = sensor name
Detailed Description: The utilization value of the sensor identified in the message is lower than the lower warning threshold value.
Recommended Response Action: The workload on server is almost zero. Consider assigning additional workloads to the server.
Category: System Health (PFM = System Performance Event)
Severity: Severity 3 (Informational)
: No alerts are applicable for this message

Message: The value of arg1 is within specified limits.
Arguments: arg1 = sensor name
Detailed Description: The value of the sensor identified in the message is within specified limits.
Recommended Response Action: No response action is required.
Category: System Health (PFM = System Performance Event)
Severity: Severity 3 (Informational)

	Filter Visibility	IPMI Alert	SNMP Alert	Email Alert	Remote System Log	WS Eventing
iDRAC		✔*	✔	✔	✔	✔
CMC

	LC Log	LCD	OS Log	Power Off	Power Cycle	Reset	Chassis Event Proxy
iDRAC	✔*		✔
CMC