메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Event and Error Message Reference Guide For 13th Generation Dell PowerEdge Servers Version 1.50

PDF

AMP Event Messages

AMP0300

Message
The system board arg1 current is less than the lower warning threshold.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0301

Message
The system board arg1 current is less than the lower critical threshold.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System board <name> current is outside of range. Contact Support
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0302

Message
The system board arg1 current is greater than the upper warning threshold.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0303

Message
The system board arg1 current is greater than the upper critical threshold.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System board <name> current is outside of range. Contact Support
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0304

Message
The system board arg1 current is outside of range.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System board <name> current is outside of range. Contact Support
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0305

Message
The system board arg1 current is within range.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health (AMP = Amperage)
Severity
Severity 3 (Informational)
Trap/EventID
2179
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0306

Message
Disk drive bay arg1 current is less than the lower warning threshold.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0307

Message
Disk drive bay arg1 current is less than the lower critical threshold.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
Disk drive bay <name> current is outside of range. Contact Support
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0308

Message
Disk drive bay arg1 current is greater than the upper warning threshold.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0309

Message
Disk drive bay arg1 current is greater than the upper critical threshold.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
Disk drive bay <name> current is outside of range. Contact Support
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0310

Message
Disk drive bay arg1 current is outside of range.
Arguments
arg1 = name
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
Disk drive bay <name> current is outside of range. Contact Support
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC ✔*           ✔*

AMP0311

Message
Disk drive bay arg1 current is within range.
Arguments
arg1 = name
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health (AMP = Amperage)
Severity
Severity 3 (Informational)
Trap/EventID
2179
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0312

Message
System level current is less than the lower warning threshold.
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC              

AMP0313

Message
System level current is less than the lower critical threshold.
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System level current is outside of range. Contact Support
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC              

AMP0314

Message
System level current is greater than the upper warning threshold.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC              

AMP0315

Message
System level current is greater than the upper critical threshold.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System level current is outside of range. Contact Support
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC              

AMP0316

Message
System level current is outside of range.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
LCD Message
System level current is outside of range. Contact Support
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔ ✔ ✔ ✔  
CMC              

AMP0317

Message
System level current is within range.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health (AMP = Amperage)
Severity
Severity 3 (Informational)
Trap/EventID
2179
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

AMP0318

Message
Chassis power level current is less than the lower warning threshold.
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔   ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0319

Message
Chassis power level current is less than the lower critical threshold.
Detailed Description
None
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔   ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0320

Message
Chassis power level current is greater than the upper warning threshold.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
Trap/EventID
2178
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔   ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0321

Message
Chassis power level current is greater than the upper critical threshold.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔   ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0322

Message
Chassis power level current is outside of range.
Detailed Description
Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
Trap/EventID
2177
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔   ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP0323

Message
Chassis power level current is within range.
Detailed Description
None
Recommended Response Action
No response action is required.
Category
System Health (AMP = Amperage)
Severity
Severity 3 (Informational)
Trap/EventID
2179
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC ✔   ✔ ✔ ✔ ✔ ✔
CMC ✔   ✔* ✔* ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔*           ✔*

AMP400

Message
The arg1 sensor has failed, and the last recorded value by the sensor was arg2 A.
Arguments
arg1 = sensor name, arg2 = current
Detailed Description
The current sensor identified in the message has failed. This condition can cause system performance issues and degradation in the monitoring capability of the system.
Recommended Response Action
Check the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. For more information, contact your service provider.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
OMSA Event ID
5200
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC         ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔   ✔*        
CMC              

AMP401

Message
Unable to read the arg1 sensor value.
Arguments
arg1 = sensor name
Detailed Description
The current sensor identified in the message has failed. This condition can cause system performance issues and degradation in the monitoring capability of the system.
Recommended Response Action
Check the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. For more information, contact your service provider.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
OMSA Event ID
5201
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC         ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔   ✔*        
CMC              

AMP402

Message
The arg1 sensor returned to a normal state with a value of arg2 A.
Arguments
arg1 = sensor name, arg2 = current
Detailed Description
The current sensor identified in the message has returned to a normal state.
Recommended Response Action
No response action is required.
Category
System Health (AMP = Amperage)
Severity
Severity 3 (Informational)
OMSA Event ID
5202
OMSA Trap ID
5202
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC     ✔*   ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔   ✔*        
CMC              

AMP403

Message
The arg1 sensor state has changed to a warning state with a value of arg2 A.
Arguments
arg1 = sensor name, arg2 = current
Detailed Description
The current sensor identified in the message is faulty or the current drawn by the system exceeds the warning threshold. This condition can cause system performance issues and degradation in the monitoring capability of the system.
Recommended Response Action
Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. For more information, contact your service provider. Otherwise, change the warning threshold for the current sensor such that it corresponds to the hardware configuration.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
OMSA Event ID
5203
OMSA Trap ID
5203
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC     ✔*   ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔   ✔*        
CMC              

AMP404

Message
The arg1 sensor detected an error with a value of arg2 A.
Arguments
arg1 = sensor name, arg2 = current
Detailed Description
The current sensor identified in the message is faulty or the current drawn by the system exceed the critical threshold. This condition can cause system performance issues and degradation in the monitoring capability of the system.
Recommended Response Action
Review system power policy, check system logs for power related failures, and review system configuration changes. For more information, contact your service provider.
Category
System Health (AMP = Amperage)
Severity
Severity 2 (Warning)
OMSA Event ID
5204
OMSA Trap ID
5204
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC     ✔*   ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔   ✔*        
CMC              

AMP405

Message
The arg1 sensor state has changed to a failed state with a value of arg2 A.
Arguments
arg1 = sensor name, arg2 = current
Detailed Description
The current sensor identified in the message may be faulty. This condition can cause system performance issues and degradation in the monitoring capability of the system.
Recommended Response Action
Check the Embedded System Management (ESM) Log for any sensor related faults. If there is a faulty sensor, replace the system board. For more information, contact your service provider.
Category
System Health (AMP = Amperage)
Severity
Severity 1 (Critical)
OMSA Event ID
5205
OMSA Trap ID
5205
Redfish Event Type
Alert
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing Redfish Eventing
iDRAC     ✔*   ✔ ✔ ✔
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔   ✔*        
CMC              

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.