Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• process-id — (Optional) Displays the opaque-area Type 10 information for an OSPF process ID. If you do not enter a process ID, this command applies only to the first OSPF process.
• vrf vrf-name — (Optional) Displays the opaque-area Type 10 information for an OSPF process ID corresponding to a VRF.

• LS Age — Displays the LS age.
• Options — Displays the optional capabilities available on the router.
• LS Type — Displays the LS type.
• Link State ID — Identifies the router ID.
• Advertising Router — Identifies the advertising router’s ID.
• LS Seq Number — Identifies the LS sequence number. This identifies old or duplicate LSAs.
• Checksum — Displays the Fletcher checksum of an LSA’s complete contents.
• Length — Displays the LSA length in bytes.
• Opaque Type — Identifies the Opaque type field, the first 8 bits of the LS ID.
• Opaque ID — Identifies the Opaque type-specific ID, the remaining 24 bits of the LS ID.

OS10# show ip ospf database opague-area
       OSPF Router with ID (1.1.1.1) (Process ID 100)
   
          Type-10 Area Local Opaque (Area 0.0.0.1)
   
LS age: 3600
Options: (No TOS-Capability, No DC)
LS type: Type-10 Area Local Opaque
Link State ID: 8.1.1.2
Advertising Router: 2.2.2.2
LS Seq Number: 0x80000008
Checksum: 0x83B8
Length: 28
Opaque Type: 8
Opaque ID: 65794
!!
!