Dell EMC SmartFabric OS10 User Guide Release 10.5.0

OS10# reload

System configuration has been modified. Save? [yes/no]:yes

Saving system configuration

Proceed to reboot the system? [confirm yes/no]:yes

boot system {active | standby}

• Enter active to load the primary OS10 image stored in the A partition.
• Enter standby to load the secondary OS10 image stored in the B partition.

Set next boot image

OS10# boot system standby
OS10# show boot 
Current system image information:
===================================
Type       Boot Type   Active          Standby         Next-Boot
-------------------------------------------------------------------
Node-id 1  Flash Boot  [A] 10.2.9999E  [B] 10.2.9999E  [B] standby