Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• vrf vrf-name—Enter the keyword vrf, then the name of the VRF.
• rp-address address—Enter the keyword address, then the RP address in dotted-decimal format (A.B.C.D).
• group-address group-address mask—Enter the keyword group-address, then the group-address mask in dotted-decimal format (/xx) to assign the group address to the RP.
• [override]—Overrides BSR updates with static RP for groups with the same prefix length.

If you have configured a static RP for a group, use the override option to override BSR updates with static RP configuration.

If you do not explicitly use the override option and:

• The prefix length of the static RP is the same as the BSR RP, the BSR RP takes precedence over statically configured RP.
• If the prefix length of the static RP and the BSR RP does not match, OS10 selects the router having the longest-match prefix as the RP.

The no form of this command removes static RP configuration.

OS10# configure terminal
OS10(config)# ip pim rp-address 171.1.1.1 group-address 225.1.1.3/32 override