メイン コンテンツに進む
  • すばやく簡単にご注文が可能
  • 注文内容の表示、配送状況をトラック
  • 会員限定の特典や割引のご利用
  • 製品リストの作成とアクセスが可能
  • 「Company Administration(会社情報の管理)」では、お使いのDell EMCのサイトや製品、製品レベルでのコンタクト先に関する情報を管理できます。

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

fefd

Configures FEFD on an interface.

Syntax
fefd [mode {normal | aggressive} | interval seconds | disable]
Parameters
  • (Optional) mode—Enter the keyword and enter either normal to enable the normal mode or aggressive to enable the aggressive mode.
  • interval—Enter the keyword and enter the FEFD interval in seconds to configure the interval between FEFD control packets on an interface. The range is from 3 to 255. The default value is 15 seconds.
  • disable—Enter the keyword to disable FEFD on a specific interface when you configure FEFD globally.
Default
Not configured
Command Mode
INTERFACE
Usage Information

The fefd command without any arguments enables the normal mode with the default FEFD interval of 15 seconds.

If you use the no fefd command, the system does not disable FEFD if the fefd mode command is already present in the configuration. Similarly, if you use the no fefd mode command, the system does not disable FEFD if the fefd command is already present in the configuration.

To disable FEFD on an interface when FEFD globally enabled, use the fefd disable command on the interface.

To unconfigure FEFD on an interface, use either the no fefd command or the no fefd mode command. To return to the default FEFD interval, use the no fefd interval command.

Example
OS10(conf-if-eth1/1/9)# fefd
OS10(conf-if-eth1/1/9)# fefd mode aggressive
OS10(conf-if-eth1/1/9)# fefd mode interval 10
Supported Releases
10.4.3.0 or later

このコンテンツを評価する

正確
有益
分かりやすい
この記事は役に立ちましたか?
0/3000 characters
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  この記事は役に立ちましたか?
  コメントでは、以下の特殊文字は利用できません: <>()\