Dell EMC SmartFabric OS10 User Guide Release 10.5.0

By default, management ports advertise all LLDP TLVs except VLAN name TLV. You can disable the LLDP TLV advertisement on management ports using the following commands:

• Disable LLDP TLVs in INTERFACE mode.

  no lldp tlv-select basic-tlv {port-description | system-name | system-description | system-capabilities | management-address}
  no lldp tlv-select dot1tlv {port-vlan-id | vlan-name}
  

OS10(config)# interface mgmt 1/1/1
OS10(conf-if-ma-1/1/1)# no lldp tlv-select basic-tlv system-name system-description
OS10(conf-if-ma-1/1/1)# no lldp tlv-select dot1tlv port-vlan-id

To advertise LLDP TLVs from the management ports, use the following commands:

OS10(config)# interface mgmt 1/1/1
OS10(conf-if-ma-1/1/1)# lldp tlv-select basic-tlv system-name system-description
OS10(conf-if-ma-1/1/1)# lldp tlv-select dot1tlv port-vlan-id