Dell OpenManage Server Administrator Version 7.4 Command Line Interface Guide

Description	Replaces the member of a given virtual disk with the destination disk.
Syntax	`omconfig storage vdisk action=replacememberdisk controller=id vdisk=id source=<PDISKID> destination=< PDISKID>`, where id is the controller ID and virtual disk ID as reported by the omreport command. The < PDISK> variable specifies the physical disk. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage vdisk controller=ID to display the IDs for the virtual disks attached to the controller.
Example to	Replace physical disk 3 on connector 0 of controller 1 of virtual disk 4 with physical disk 5. On a Serial Attached SCSI (SAS) controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA Ccntrollers	`omconfig storage vdisk action=replacememberdisk controller=1 vdisk=4 source=0:3 destination=0:5`
Example for SAS controllers	`omconfig storage vdisk action=replacememberdisk controller=1 vdisk=4 source=0:2:3 destination=0:2:5`

Omconfig Replace Member Virtual Disk