If you perform the erase process on your old PC without migrating your data, your photos, videos, documents, and other important files, these files are permanently lost. On your old PC, a warning is displayed with an option to migrate all your files before beginning the erase process.
Perform erase after canceling migration
Depending on where you are in your cancellation process, one of the following two prompts is displayed. For more information about the migration flow, see
Migrate and erase data from old PC.
Figure 1. Migration canceledFigure 2. Migration canceled
If you click
Erase This PC and migration is not completed, the following page is displayed on the old PC:
Figure 3. No migrations performed
It is recommended that you click
Perform Migration to ensure that all your personal files and settings are safely and securely migrated to your new PC. But you must click
Proceed To Erase in case your data was backed up by some other means, and you are ready to reset your old PC to its factory state.
If you select
Perform Migration, the following page with instructions to start migration is displayed on the old PC:
Figure 4. Searching for new PC
Perform erase after closing
Data Assistant post pairing
Figure 5. Relaunching
Data Assistant after closing
If you click
Erase this PC, a message is displayed that migration is not performed. You can either choose to begin migration or go to the erase process.
It is recommended that you click
Perform Migration to ensure that all your personal files and settings are safely and securely migrated to your new PC. But you must click
Proceed To Erase in case your data was backed up by some other means, and you are ready to reset your old PC to its factory state.
Click
Erase This PC when the application is ready to migrate
If this is the first migration process and you are in
We're ready to start your migration page, and if you click
Erase this PC, a message is displayed that migration is not performed.
Figure 6. Ready for migrationFigure 7. No migration is performed after pairing is competed
If you click
Perform Migration, the following message is displayed as
Data Assistant has verified and paired with the new PC.
Data Assistant continues from where you left:
We're ready to start your migration.
For information about errors that you may encounter during migration and data erase, and the possible workaround, see
Error codes.
Non sono disponibili i dati per l'argomento
Fornisci una valutazione (1-5 stelle).
Fornisci una valutazione (1-5 stelle).
Fornisci una valutazione (1-5 stelle).
Indica se l'articolo è stato utile o meno.
I commenti non possono contenere i seguenti caratteri speciali: <>() \