Integrated Dell Remote Access Controller 9 User's Guide

Configuring persistence policy settings using iDRAC web interface

1. In the iDRAC Web interface, go to Configuration > System Settings > Hardware Settings > I/O Identity Optimization.
2. Click I/O Identity Optimization tab.
3. In the Persistence Policy section, select one or more of the following for each persistence policy:
   • Warm Reset - The virtual address or target settings persist when warm reset condition occurs.
   • Cold Reset - The virtual address or target settings persist when cold reset conditions occur.
   • AC Power Loss - The virtual address or target settings persist when AC power loss conditions occur.
4. Click Apply.
   The persistence policies are configured.