Upgrade from ThinOS 8.6 to ThinOS 9.1.4234 using Wyse Management Suite
If you are running any ThinOS 8.6 version, you must first install the ThinOS 8.6_807 image with the latest BIOS version, and then upgrade to ThinOS 9.1.4234. For the latest BIOS versions, see
Tested BIOS version for ThinOS 9.1.4234.
The device reboots after the ThinOS image is downloaded. Once the upgrade completes, the device is automatically registered to Wyse Management Suite. Dell Technologies recommends you to back up your device settings before you initiate the upgrade process. All device settings are erased after you upgrade from ThinOS 8.6 except the following settings:
Wyse Management Suite group token and server settings
Static DNS
Certificates
IEEE802.1x wired authentication settings
Wireless connections—The WEP/Sharekey security type is changed to
Open as they are not supported in ThinOS 9.1.4234
Proxy settings
NOTE:For more information about how to install the ThinOS 9.1.4234 image, see the
Dell Wyse ThinOS Version 9.1.4234 Migration Guide at
www.dell.com/support.
Les données de cette rubrique ne sont pas disponibles
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\