username
|
string
|
User name.
|
roles
|
string
|
-
monitor: User can view but not change system settings.
-
manage: User can view and change system settings.
- diagnostic: User can view and change system settings.
|
user-type
|
string
|
The experience level of the user:
Novice ,
Standard ,
Advanced , or
Diagnostic . This parameter does not affect access to commands.
|
user-type-numeric
|
string
|
Numeric equivalents for
user-type values.
-
1: Novice
- 2: Standard
-
3: Advanced
-
4: Diagnostic
|
user-locale
|
string
|
The display language.
|
user-locale-numeric
|
string
|
Numeric equivalents for
user-locale values
- 0: English
- 3: Spanish
- 4: French
- 5: German
- 7: Japanese
- 8: Korean
- 11: Chinese-simplified
|
interface-access-WBI
|
string
|
- x: User can access the
PowerVault Manager web-browser interface.
- (blank): User cannot access this interface.
|
interface-access-CLI
|
string
|
-
x: User can access the command-line interface.
- (blank): User cannot access this interface.
|
interface-access-FTP
|
string
|
- x: User can access the FTP interface.
- (blank): User cannot access this interface.
|
interface-access-SMIS
|
string
|
- x
: User can access the Storage Management Initiative Specification (SMI-S) interface.
- (blank): User cannot access this interface.
|
interface-access-SNMP
|
string
|
- U: The user can access the SNMPv3 interface and view the MIB.
- T: The user can access the SNMPv3 interface and receive trap notifications.
- (blank): User cannot access this interface.
|
storage-size-base
|
uint8
|
The base for entry and display of storage-space sizes:
-
2: Sizes are shown as powers of 2, using 1024 as a divisor for each magnitude.
-
10: Sizes are shown as powers of 10, using 1000 as a divisor for each magnitude.
Operating systems usually show volume size in base 2. Disk drives usually show size in base 10. Memory (RAM and ROM) size is always shown in base 2.
|
storage-size-precision
|
uint8
|
The number of decimal places (1-10) for display of storage-space sizes.
|
storage-size-units
|
string
|
The unit for display of
storage-space sizes.
-
auto: Lets the system determine the proper unit for a size.
- MB: Megabytes.
- GB: Gigabytes.
- TB: Terabytes.
Based on the precision setting, if the selected unit is too large to meaningfully display a size, the system uses a smaller unit for that size. For example, if units is set to TB, precision is set to 1, and base is set to 10, the size 0.11709 TB is instead shown as 117.1 GB.
|
temperature-scale
|
string
|
- Celsius: Use the Celsius scale to display temperature values.
- Fahrenheit: Use the Fahrenheit scale to display temperature values.
|
timeout
|
uint32
|
Time in seconds that the session can be idle before it automatically ends. Valid values are 120-43200 seconds (2-720 minutes).
|
authentication-type
|
string
|
For an SNMPv3 user, this specifies whether to use a security authentication protocol. Authentication uses the user password
- none: No authentication.
- MD5: MD5 authentication.
- SHA: SHA-1 authentication.
|
privacy-type
|
string
|
For an SNMPv3 user, this specifies whether to use a security encryption protocol. This parameter requires the
privacy-password property and the
authentication-type property.
- none : No encryption.
-
DES : Data Encryption Standard.
- AES : Advanced Encryption Standard.
|
password
|
string
|
User password. For a standard user the password is represented by eight asterisks. For an SNMPv3 user this is the authentication password.
|
default-password-changed
|
string
|
Shows whether the default password for the user has been changed.
|
default-password-changed-numeric
|
uint32
|
Numeric equivalents for
default-password-changed values.
|
privacy-password
|
string
|
Encryption password for an SNMPv3 user whose privacy type is set to DES or AES .
|
trap-destination
|
string
|
For an SNMPv3 user whose
interface-access-SNMP property is set to
snmptarget, this specifies the IP address of the host that will receive SNMP traps.
|