Dell PowerVault ME4 Series Storage System CLI Guide

unhealthy-component

This basetype is used by all commands that show component health.

Table 1. unhealthy-component properties
Name	Type	Description
component-type	string	Component type. super-cap: Supercapacitor pack MC : Management Controller port : Host port controller: Controller module expansion module: Expansion module PSU: Power supply unit disk: Disk enclosure: Enclosure vdisk : Disk group (v2) disk group: Disk group (v3) fan CompactFlash disk slot SAS port sensor network port virtual pool virtual disk group volume volume: Source volume snapshot host volume map system
component-type-numeric	uint32	Numeric equivalents for component-type values. 0: super-cap 1: MC 2: port 3: controller 4: expansion module 5: PSU 6: disk 7: enclosure 8: vdisk (v2) or disk group (v3) 9: fan 10: CompactFlash 11: disk slot 12: SAS port 13: sensor 14: network port 15: virtual pool 16: virtual disk group 17: volume 19: volume (source volume) 20: snapshot 21: host 25: volume map 26: system
component-id	string	Component identifier, such as A for controller A.
basetype	string	Component basetype.
primary-key	string	Durable ID of the component.
health	string	Component health. OK Degraded Fault Unknown N/A
health-numeric	uint32	Numeric equivalents for health values. 0: OK 1: Degraded 2: Fault 3: Unknown 4: N/A
health-reason	string	If Health is not OK, the reason for the health state.
health-recommendation	string	If Health is not OK, the recommended actions to take to resolve the health issue.