Dell PowerVault ME4 Series Storage System CLI Guide

snmp-parameters

This basetype is used by show snmp-parameters.

Table 1. snmp-parameters properties
Name	Type	Description
snmp-enabled	string	Shows whether the Simple Network Management Protocol (SNMP) interface is enabled or disabled. Disabled—SNMP is disabled. Enabled—SNMP is enabled.
snmp-enabled- numeric	uint32	Numeric equivalents for snmp-enabled values. 0: Disabled 1: Enabled
snmp-filter	string	Minimum level of events to include for SNMP traps crit—Sends notifications for Critical events only. error—Sends notifications for Error and Critical events. warn—Sends notifications for Warning, Error, and Critical events. resolved—Sends notifications for Resolved, Warning, Error, and Critical events. info—Sends notifications for all events. none—No events are sent as traps and traps are disabled.
snmp-filter- numeric	uint32	Numeric equivalents for snmp-filter values. 0: info 1: resolved 2: warn 3: error 4: crit 5: none
snmp-trap-host-1	string	Trap host IP address.
snmp-trap-host-2	string	Trap host IP address.
snmp-trap-host-3	string	Trap host IP address.
snmp-read- community	string	The community string for read-only access. The value is obscured for users having only the monitor role and is shown in clear text for users having the manage role.
snmp-write- community	string	The community string for write access. The value is obscured for users having only the monitor role and is shown in clear text for users having the managerole.