Dell PowerVault ME4 Series Storage System CLI Guide

show sensor-status


Description	Shows information about each environmental sensor in each enclosure. Information shown includes overall unit (enclosure) status, and temperature, voltage, charge, and current as applicable for enclosure components. For temperature and voltage ranges (both normal and error), see your product’s installation documentation.
Minimum role	monitor
Syntax	show sensor-status
Output	Encl The enclosure ID. Drawer The drawer ID. Sensor Name The sensor name and location. Value For a sensor, its value. For Overall Unit Status, one of the status values below. Status OK: The sensor is present and detects no error condition. Warning: The sensor detected a non-critical error condition. Temperature, voltage, or current is between the warning and critical thresholds. Critical: The sensor detected a critical error condition. Temperature, voltage, or current exceeds the critical threshold. Unavailable: The sensor is present with no known errors, but has not been turned on or set into operation because it is initializing. This typically occurs during controller startup. Unrecoverable: The enclosure management processor (EMP) cannot communicate with the sensor. Unknown: The sensor is present but status is not available. Not Installed: The sensor is not present. Unsupported: Status detection is not implemented.
Examples	Show the status of each environmental sensor in each enclosure. # show sensor-status
Basetypes	sensors status