Passer au contenu principal

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

show protocols


Description	Shows which management services and protocols are enabled or disabled.
Minimum role	monitor
Syntax	show protocols
Output	Web Browser Interface (HTTP) Shows whether the standard PowerVault Manager web server interface is enabled or disabled. Secure Web Browser Interface (HTTPS) Shows whether the secure PowerVault Manager web server interface is enabled or disabled. Command Line Interface (Telnet) Shows whether the standard CLI is enabled or disabled. Secure Command Line Interface (SSH) Shows whether the secure shell CLI is enabled or disabled. Storage Management Initiative Specification (SMI-S) Shows whether the secure SMI-S interface is enabled or disabled. When enabled, this option allows SMI-S clients to communicate with each controller’s embedded SMI-S provider via HTTP port 5989. Unsecure Storage Management Initiative Specification (SMI-S 5988) Shows whether the unsecure SMI-S interface is enabled or disabled. When enabled, this option allows SMI-S clients to communicate with each controller’s embedded SMI-S provider via HTTP port 5988. Service Location Protocol (SLP) Shows whether the SLP interface is enabled or disabled. File Transfer Protocol (FTP) Shows whether the unsecure secondary interface for installing firmware updates, installing security certificates and keys and downloading logs is enabled or disabled. SSH File Transfer Protocol (SFTP) Shows whether the secure secondary interface for installing firmware updates, installing security certificates and keys and downloading logs is enabled or disabled. Simple Network Management Protocol (SNMP) Shows whether the SNMP interface is enabled or disabled. When this is disabled, all SNMP requests to the MIB are disabled and SNMP traps are disabled. Service Debug Shows whether the Telnet debug port is enabled or disabled. In-band SES Management (SES) Shows whether the in-band SES interface is enabled or disabled. Activity Progress Reporting (activity) Shows whether access to the activity progress interface via HTTP port 8081 is enabled or disabled. This mechanism reports whether a firmware update or partner firmware update operation is active and shows the progress through each step of the operation. In addition, when the update operation completes, status is presented indicating either the successful completion, or an error indication if the operation failed. Management Mode Shows the default management mode. Linear: Uses linear-storage terminology in command output and system messages. For example, `vdisk` for disk groups and pools. Virtual: Uses terminology in command output and system messages that is generalized for managing virtual and linear storage. For example, `disk group` for disk groups and `pool` for pools. To see the management mode for the current CLI session, which can be set differently than the default, use the show cli-parameters command. SSH Port Shows the port number used for SSH. SFTP Port Shows the port number used for SFTP.
Examples	Show the status of service and security protocols. # show protocols
Basetypes	security-communications-protocols communication-ports status
See also	set protocols show cli-parameters