Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

show peer-connections

Description Shows information about a peer connection between two systems. You can run this command on either the local or remote system.
Minimum role monitor
Syntax

show peer-connections

[verify-links]

peer-connection-ID

Parameters [verify-links]

Optional. If a peer connection ID is specified, this parameter displays the ports that can be seen by each port on each peer system.

peer-connection-ID

Optional. Specifies the name or serial number of the peer connection for which to show information. If this parameter is not specified the command shows information for all peer connections.

Output Peer Connection Name

The name of the peer connection.

Peer Connection Type
The type of ports being used for the peer connection:
  • FC: FC ports.
  • iSCSI: iSCSI ports.
Connection Status
  • Online: The systems have a valid connection.
  • Offline: No connection is available to the remote system.
Health
  • OK
  • Fault
  • Unknown
Health Reason

If Health is not OK, this field shows the reason for the health state.

Health Recommendation

If Health is not OK, this field shows recommended actions to take to resolve the health issue.

Local Port

The IDs of ports in the local system.

Port Address

The assigned port address.

Remote Port

The IDs of ports in the remote system.

Reachable Remote Links

Shown by the verify-links parameter. The IDs of linked ports in the remote system.

Reachable Local Links

Shown by the verify-links parameter. The IDs of linked ports in the local system

Examples Show information for all peer connections.

# show peer-connections

Show information for peer connection Peer1.

# show peer-connections Peer1

Show information for peer connection Peer1 and the ports that can be seen from each port.

# show peer-connections Peer1 verify-links

Basetypes

peer-connections

status

See also

create peer-connection

delete peer-connection

query peer-connection

set peer-connection


Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\