Dell PowerVault ME4 Series Storage System CLI Guide

show iscsi-parameters


Description	Shows system-wide parameters for iSCSI host ports in each controller module.
Minimum role	monitor
Syntax	show iscsi-parameters
Output	CHAP Shows whether Challenge-Handshake Authentication Protocol (CHAP) is enabled or disabled. Enabled: CHAP is enabled. Disabled: CHAP is disabled. Jumbo Frames Shows whether support for jumbo frames is enabled or disabled. Enabled: Jumbo-frame support is enabled. Disabled: Jumbo-frame support is disabled. iSNS Shows whether support for Internet Storage Name Service (iSNS) is enabled or disabled. Enabled: iSNS support is enabled. Disabled: iSNS support is disabled. iSNS IP The address of the iSNS server. The default address is all zeroes. iSNS Alt IP The address of the alternate iSNS server. The default address is all zeroes. iSCSI Speed The iSCSI host port link speed. auto: The proper speed is auto-negotiated. 1Gbps: The speed is forced to 1 Gbit/s, overriding a downshift that can occur during auto-negotiation with 1-Gbit/s HBAs. This setting does not apply to 10-Gbit/s HBAs. iSCSI IP Version 4: iSCSI host port addresses use IPv4 format. 6: iSCSI host port addresses use IPv6 format.
Examples	Show system-wide parameters for iSCSI ports. # show iscsi-parameters
Basetypes	iscsi-parameters status
See also	set iscsi-parameters