Dell PowerVault ME4 Series Storage System CLI Guide

show fde-state


Description	Shows Full Disk Encryption information for the storage system. NOTE: If you insert an FDE disk into a secured system and the disk does not come up in the expected state, perform a manual rescan by using the rescan command.
Minimum role	monitor
Syntax	show fde-state
Output	FDE Security Status Unsecured. The system has not been secured with a passphrase. Secured. The system has been secured with a passphrase. Secured, Lock Ready. The system has been secured and lock keys have been cleared. The system will become locked after the next power cycle. Secured, Locked. The system is secured and the disks are locked to data access, preventing their use. Lock Key ID The current lock ID is displayed. Import Key ID The previous or import lock ID is displayed. FDE Configuration Time If the system is secured, the time at which the current lock ID was set.
Examples	Show FDE information. # show fde-state
Basetypes	fde-state status
See also	clear fde-keys set fde-import-key set fde-lock-key set fde-state