Passer au contenu principal

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

show disk-parameters


Description	Shows disk settings.
Minimum role	monitor
Syntax	show disk-parameters
Output	SMART Shows whether SMART (Self-Monitoring Analysis and Reporting Technology) is enabled or disabled for disks. Detect-Only: Each disk in the system retains its individual SMART setting, as will new disks added to the system. Enabled: SMART is enabled for all disks in the system and will be enabled for new disks added to the system. Disabled: SMART is disabled for all disks in the system and will be disabled for new disks added to the system. Drive Write Back Cache Disabled: Disk write-back cache is disabled for all disks in the system and will be disabled for new disks added to the system. This value cannot be changed. Timeout Retry Maximum Maximum number of times a timed-out I/O operation can be retried before the operation is failed. This value cannot be changed. Attempt Timeout Number of seconds before an I/O operation is aborted and possibly retried. This value cannot be changed. Overall Timeout Total time in seconds before an I/O operation is failed regardless of the Attempt Timeout and Timeout Retry Maximum settings. This value cannot be changed. Inactive Drive Spin Down Shows whether spinning disks that are available or are global spares will spin down after a period of inactivity shown by the Inactive Drive Spin Down Delay field. Disabled: Drive spin down for available disks and global spares is disabled. Enabled: Drive spin down for available disks and global spares is enabled. Inactive Drive Spin Down Delay Shows the period of inactivity in minutes after which spinning disks that are available or are global spares will spin down, from 1 to 360 minutes. The value 0 means spin down is disabled.
Examples	Show disk settings. # show disk-parameters
Basetypes	drive-parameters status
See also	set disk-parameters