Dell PowerVault ME4 Series Storage System CLI Guide

restore defaults


Description	Restores the default configuration on the controllers. CAUTION:This command is for use only with the direction from a service technician. For details about which settings are restored, see Settings changed by restore defaults. NOTE:This command restores the default settings to the controllers and restarts each controller module. Changes to host interface settings may cause loss of data availability and require some reconfiguration to restore host access to volumes. Changes to network-port IP addresses may cause loss of access to management interfaces.
Minimum role	manage
Syntax	restore defaults [noprompt] [prompt yes\|no]
Parameters	[noprompt] Optional. Suppresses confirmation prompts. Specifying this parameter enables the command to proceed without user interaction. [prompt yes\|no] yes: Allow the command to proceed. no: Cancel the command. If this parameter is omitted, you must manually reply to prompts.
Examples	Restore the default configuration on the controllers. # restore defaults
See also	reset smis-configuration restart mc restart sc