Dell PowerVault ME4 Series Storage System CLI Guide

reset smis-configuration


Description	Resets the SMI-S configuration files. NOTE:This command is for use by or with direction from a service technician. This command will reset the configuration of the SMI-S service to default settings. After running this command, any hosts registered via SMI-S will need to be registered again. Messages are displayed when the SMI-S configuration is reset and SMI-S is restarted.
Minimum role	manage
Syntax	reset smis-configuration [a\|b\|both] [prompt yes\|no] [noprompt]
Parameters	[a\|b\|both]Optional. The controller module containing the controller to restart. If this parameter is omitted, the command affects the controller being accessed. [prompt yes\|no] Optional. For scripting, this specifies an automatic reply to confirmation prompts: yes: Allow the command to proceed. no: Cancel the command. If this parameter is omitted, you must reply to prompts.noprompt Optional. Suppresses confirmation prompts. Specifying this parameter allows the command to proceed without user interaction.
Output	Messages are displayed when the SMI-S configuration is reset and SMI-S is restarted.
Examples	Reset the SMI-S configuration on controller A, to which you are logged in. # reset smis-configuration a From controller A, reset the SMI-S configuration on controller B. # reset smis-configuration b Reset the SMI-S configuration on both Storage Controllers. # reset smis-configuration both
See also	restore defaults