name
|
string
|
The name of the pool.
|
serial-number
|
string
|
The serial number of the pool.
|
url
|
string
|
Pool URL.
|
storage-type
|
string
|
- Linear: Linear pool.
- Virtual: Virtual pool.
|
storage-type- numeric
|
uint32
|
Numeric equivalents for
storage-type values.
|
blocksize
|
uint32
|
The size of a block, in bytes.
|
total-size
|
string
|
The total capacity of the pool.
|
total-size-numeric
|
unit64
|
Unformatted
total-size value in blocks.
|
total-avail
|
string
|
The available capacity in the pool.
|
total-avail-numeric
|
unit64
|
Unformatted total-avail value in blocks.
|
snap-size
|
string
|
Not applicable.
|
snap-size-numeric
|
unit64
|
Not applicable.
|
allocated-pages
|
uint32
|
For a virtual pool, the number of 4 MB pages that are currently in use. For a linear pool, 0.
|
available-pages
|
uint32
|
For a virtual pool, the number of 4 MB pages that are still available to be allocated. For a linear pool, 0.
|
overcommit
|
string
|
-
Disabled: The allocated size of the volumes cannot exceed the physical capacity of the pool.
-
Enabled: The allocated size of the volumes can exceed the physical capacity of the pool.
- N/A: Not applicable (linear pool).
|
overcommit-numeric
|
uint32
|
Numeric equivalents for
overcommit values.
- 0: Disabled
- 1: Enabled
- 2: N/A
|
over-committed
|
string
|
- True: The pool is overcommitted.
- False: The pool is not overcommitted.
|
over-committed-numeric
|
uint32
|
Numeric equivalents for
over-committed values.
|
disk-groups
|
uint16
|
The number of disk groups in the pool.
|
volumes
|
uint16
|
The number of volumes in the pool.
|
page-size
|
string
|
The page size, formatted to use the current base, precision, and units.
|
page-size-numeric
|
uint64
|
Unformatted
page-size value in blocks.
|
low-threshold
|
string
|
The low threshold for page allocation as a percentage of pool capacity.
|
middle-threshold
|
string
|
The middle threshold for page allocation as a percentage of pool capacity.
|
high-threshold
|
string
|
The high threshold for page allocation as a percentage of pool capacity. The threshold value is automatically calculated based on the available capacity of the pool minus 200 GB of reserved space.
|
utility-running
|
string
|
Job running on the disk, if any.
- (blank): None.
- DRSC: The disk group is being scrubbed.
- EXPD: The disk group is being expanded.
- INIT: The disk group is being initialized.
- RBAL: The ADAPT disk group is being rebalanced.
- RCON: At least one disk in the disk group is being reconstructed.
- VDRAIN: The virtual disk group is being removed and its data is being drained to another disk group.
- VPREP: The virtual disk group is being prepared for use in a virtual pool.
- VRECV: The virtual disk group is being recovered to restore its membership in the virtual pool.
- VREMV: The disk group and its data are being removed.
- VREMV: The disk group and its data are being removed.
- VRFY: The disk group is being verified.
- VRSC: The disk group is being scrubbed.
|
utility-running-numeric
|
uint32
|
Numeric equivalents for job-running values.
- 0: None
- 2: INIT
- 3: RCON
- 4: VRFY
- 5: EXPD
- 6: VRSC
- 7: DRSC
- 9: VREMV
- 12: VPREP
- 13: VDRAIN
- 14: VRECV
- 16: RBAL
|
preferred-owner
|
string
|
Controller that owns the disk group and its volumes during normal operation.
- A: Controller A.
- B: Controller B.
|
preferred-owner-numeric
|
uint32
|
Numeric equivalents for
preferred-owner values.
|
owner
|
string
|
Current owner, which is either the preferred owner during normal operation or the partner controller when the preferred owner is offline.
- A: Controller A.
- B: Controller B.
|
owner-numeric
|
uint32
|
Numeric equivalents for
owner values.
|
rebalance
|
string
|
For internal use only.
|
rebalance-numeric
|
uint32
|
For internal use only.
|
migration
|
string
|
For internal use only.
|
migration-numeric
|
uint32
|
For internal use only.
|
zero-scan
|
string
|
For internal use only.
|
zero-scan-numeric
|
uint32
|
For internal use only.
|
idle-page-check
|
string
|
For internal use only.
|
idle-page-check-numeric
|
uint32
|
For internal use only.
|
read-flash-cache
|
string
|
For internal use only.
|
read-flash-cache-numeric
|
uint32
|
For internal use only.
|
metadata-vol-size
|
string
|
The size of the pool’s metadata volume, formatted to use the current base, precision, and units. This needs to be taken into consideration to account for all pages in the pool that are used.
|
metadata-vol-size-numeric
|
uint64
|
Unformatted
metadata-vol-size value in blocks.
|
total-rfc-size
|
string
|
The total size in blocks of the read cache in the pool.
|
total-rfc-size-numeric
|
uint64
|
Unformatted
total-rfc-size value in blocks.
|
available-rfc-size
|
string
|
The unused read-cache space in blocks that is available for use by the pool.
|
available-rfc- size-numeric
|
uint64
|
Unformatted available-rfc-size value in blocks.
|
reserved-size
|
string
|
The total number of pages that are reserved for virtual volumes in the pool.
|
reserved-size-numeric
|
unit64
|
Unformatted
reserved-size value in blocks.
|
reserved-unalloc-size
|
string
|
The total number of pages that are reserved, but not yet allocated, for virtual volumes in the pool.
|
reserved-unalloc-size-numeric
|
unit64
|
Unformatted
reserved-unalloc-size value in blocks.
|
pool-sector-format
|
string
|
The sector format of disks in the disk group.
- 512n: All disks use 512-byte native sector size. Each logical block and physical block is 512 bytes.
- 512e: All disks use 512-byte emulated sector size. Each logical block is 512 bytes and each physical block is 4096 bytes. Eight logical blocks will be stored sequentially in each physical block. Logical blocks may or may not be aligned with physical block boundaries.
- Mixed: The disk group contains a mix of 512n and 512e disks. This is supported, but for consistent and predictable performance, do not mix disks of different sector size types (512n, 512e).
|
pool-sector-format-numeric
|
uint32
|
Numeric equivalents for
pool-sector-numeric values.
|
health
|
string
|
- OK
- Degraded
- Fault
- N/A
- Unknown
|
health-numeric
|
uint32
|
Numeric equivalents for
health values.
- 0: OK
- 1: Degraded
- 2: Fault
- 3: Unknown
- 4: N/A
|
health-reason
|
string
|
If Health is not
OK, the reason for the health state.
|
health-recommendation
|
string
|
If Health is not
OK, the recommended actions to take to resolve the health issue.
|
disk-groups
|
Embedded; see
disk-groups.
|
tiers
|
Embedded; see
tiers.
|
unhealthy-component
|
Embedded; see
unhealthy-component.
|