Dell PowerVault ME4 Series Storage System CLI Guide

fan-modules

This basetype is used by show fan-modules.

Table 1. fan-modules properties
Name	Type	Description
durable-id	string	Fan module ID.
enclosure-id	uint32	Enclosure ID.
dom-id	uint32	The fan module position, shown as an index value that starts at 0 and increments from left to right as viewed from the back of the enclosure.
name	string	Fan module name.
location	string	Fan module location.
status	string	Fan module status. Unsupported OK Critical Warning Unrecoverable Not Installed Unknown Unavailable
status-numeric	uint32	Numeric equivalents for status values. 0: Unsupported 1: OK 2: Critical 3: Warning 4: Unrecoverable 5: Not Installed 6: Unknown 7: Unavailable
extended-status	hex32	A numeric value that supplements the standard SES status shown by the status and status-numeric properties, and represents a specific condition.
position	string	Fan module position, as viewed from the back of the enclosure. Indexed
position-numeric	uint32	Numeric equivalents for position values. 5: Indexed
health	string	OK Degraded Fault N/A Unknown
health-numeric	uint32	Numeric equivalents for healthvalues. 0: OK 1: Degraded 2: Fault 3 4: Unknown
health-reason	string	If Health is not OK, the reason for the health state.
health-recommendation	string	If Health is not OK, the recommended action to take to resolve the health issue.
unhealthy-component	Embedded; see unhealthy-component.
fan-details	Embedded; see fan.