Dell PowerVault ME4 Series Storage System CLI Guide

expanders

This basetype is used by show enclosures.

Table 1. expanders properties
Name	Type	Description
durable-id	string	Expander ID.
enclosure-id	uint32	Enclosure ID.
drawer-id (5U84 enclosure)	uint8	0: Top 1: Bottom
drawer-id (2U12/24 enclosure)	uint8	Not applicable (255).
dom-id	uint32	The expander position, shown as an index value that starts at 0 and increments from left to right as viewed from the back of the enclosure.
path-id	string	A: Controller A. B: Controller B.
path-id-numeric	uint32	Numeric equivalents for path-id values. 0: B 1: A
name	string	Expander name.
location	string	Expander location.
status	string	Expander status. Unsupported OK Critical Warning Unrecoverable Not Installed Unknown Unavailable
status-numeric	uint32	Numeric equivalents for status values. 0: Unsupported 1: OK 2: Critical 3: Warning 4: Unrecoverable 5: Not Installed 6: Unknown 7: Unavailable
extended-status	hex32	Always 0 for this component.
fw-revision	string	Expander firmware revision.
health	string	OK Degraded Fault N/A Unknown
health-numeric	uint32	Numeric equivalents for health values. 0: OK 1: Degraded 2: Fault 3: N/A 4: Unknown
health-reason	string	If Health is not OK, the reason for the health state.
health-recommendation	string	If Health is not OK, the recommended action to take to resolve the health issue.
unhealthy-component	Embedded; see unhealthy-component.
sas-port-details	Embedded; see expander-ports.