Passer au contenu principal
Quitter

Bienvenue dans l’univers Dell

Mon compte
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits
Se connecter Créer un compte Connexion au compte Premier Connexion au programme de partenariat
Nous contacter

Vos paniers Dell.com

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

drawers

This basetype is used by show enclosures.

Table 1. drawers properties
Name Type Description
durable-id string Drawer ID.
drawer-id

(5U84 enclosure)

uint8
  • 0: Top
  • 1: Bottom
drawer-id

(2U12/24 enclosure)

uint8 Not applicable (255).
drawer-wwn string Drawer WWN.
part-number string Drawer part number.
name string Drawer name.
position string The drawer position in the enclosure, as viewed from the front.
  • Left
  • Right
  • Top
  • Bottom
position-numeric uint32 Numeric equivalents for position values.
  • 0: Left
  • 1: Right
  • 2: Top
  • 3: Bottom
rows uint8 Number of rows of disk slots.
columns uint8 Number of columns of disk slots.
slots uint8 Number of disk slots in drawer.
number-of-disks uint8 Number of disk slots (not installed disks) in drawer.
emp-a-busid string SCSI channel ID of Enclosure Management Processor (EMP) A in the Expander Controller of a drawer.
emp-a-targetid string SCSI target ID of Enclosure Management Processor (EMP) A in the Expander Controller of a drawer.
emp-a-rev string Firmware revision of Enclosure Management Processor (EMP) A in the Expander Controller of a drawer.
emp-b-busid string SCSI channel ID of Enclosure Management Processor (EMP) B in the Expander Controller of a drawer.
emp-b-targetid string SCSI target ID of Enclosure Management Processor (EMP) B in the Expander Controller of a drawer.
emp-b-rev string Firmware revision of Enclosure Management Processor (EMP) B in the Expander Controller of a drawer.
emp-a string Shows the field name EMP A in console format.
emp-a-ch-id-rev string Channel ID and firmware revision of Enclosure Management Processor A in the Expander Controller of a drawer.
emp-b string Shows the field name EMP B in console format.
emp-b-ch-id-rev string Channel ID and firmware revision of Enclosure Management Processor B in the Expander Controller of a drawer.
locator-led string Shows the state of the locator LED on a drawer:
  • Off
  • On
locator-led-numeric uint32

Numeric equivalents for locator-led values.

  • 0: Off
  • 1: On
status string Drawer status.
  • Unsupported
  • OK
  • Critical
  • Warning
  • Unrecoverable
  • Not Installed
  • Unknown
  • Unavailable
status-numeric uint32 Numeric equivalents for status values.
  • 0: Unsupported
  • 1: OK
  • 2: Critical
  • 3: Warning
  • 4: Unrecoverable
  • 5: Not Installed
  • 6: Unknown
  • 7: Unavailable
extended-status hex32 A numeric value that supplements the standard SES status shown by the status and status-numeric properties, and represents a specific condition.
health string
  • OK
  • Degraded
  • Fault
  • N/A
  • Unknown
health-numeric uint32 Numeric equivalents for health values.
  • 0: OK
  • 1: Degraded
  • 2: Fault
  • 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
unhealthy component Embedded; see unhealthy-component.
sideplane-details Embedded; see sideplanes.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\