Ensure that your work surface is flat and clean to prevent the computer
cover from being scratched.
Turn off your computer.
Disconnect all network cables from the computer.
CAUTION To disconnect a network cable, first unplug the cable
from your computer and then unplug the cable from the network device.
Disconnect your computer and all attached devices from their electrical
outlets.
Press and hold the power button while the computer is unplugged to
ground the system board.
NOTE To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface
at the same time as touching a connector on the back of the computer.
Les données de cette rubrique ne sont pas disponibles
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\