- Notes, cautions, and warnings
- Working on your computer
- Chassis
- Disassembly and reassembly
- Technology and components
- System setup
- Troubleshooting
- Getting help
Option | Description |
C States Control | Allows you to enable or disable additional processor sleep states. This option is enabled by default. |
AMD TurboCore Technology | This options is disable by default. |
Option | Description |
---|---|
AMD-V Technology | This option is enabled by default. |
AMD-VI Technology | This option is enabled by default. |
Option | Description |
---|---|
Service Tag | Displays the Service Tag of your computer. |
Asset Tag | Allows you to create a system asset tag if an asset tag is not already set. This option is set by default. |
SERR Messages | Controls the SERR message mechanism. This option is set by default. Some graphics cards require that the SERR message mechanism be disabled. |
Dell Development Configuration | This options is disabled by default. |
BIOS Downgrade | Allows you to control flashing of the system firmware to the previous versions. This option is enabled by default. |
Data Wipe | Allows you to securely erase the data from all the available internal storages, such as HDD, SSD, mSATA, and eMMC. The option Wipe on Next Boot is disabled by default. |
BIOS recovery | Allows you to recover the corrupted BIOS conditions from the recovery files on the primary hard drive. The option BIOS Recovery from Hard Drive is selected by default |