- Notes, cautions, and warnings
- Working on your computer
- Removing and installing components
- Recommended tools
- Back cover
- Front Bezel
- Opening the front panel door
- Storage
- Removing 3.5–inch hard drive assembly
- Removing 3.5–inch hard drive from the hard drive bracket
- Installing the 3.5–inch hard drive into the hard drive bracket
- Installing 3.5–inch hard drive assembly
- Removing the 2.5–inch drive assembly
- Removing the 2.5–inch drive from the drive bracket
- Installing the 2.5–inch hard drive into the hard drive bracket
- Installing the 2.5-inch drive assembly
- Optical drive
- M.2 PCIe SSD
- SD card reader
- Memory module
- Expansion card
- Power supply unit
- VGA daughter board
- Intrusion switch
- Power switch
- Speaker
- Coin cell battery
- Heat sink assembly
- Processor
- System fan
- System board
- M.2 Intel Optane Memory Module 16 GB
- Technology and components
- System setup
- Software
- Troubleshooting your computer
- Technical specifications
- Processor specifications
- Memory specifications
- Video specifications
- Audio specifications
- Communication specifications
- Storage specifications
- Ports and connectors specifications
- Power supply specifications
- Physical dimension specifications
- System board layout
- Controls and lights specifications
- Environmental specifications
- Contacting Dell
Bienvenue
Bienvenue dans l’univers Dell
Mon compte
- Passer des commandes rapidement et facilement
- Afficher les commandes et suivre l’état de votre expédition
- Profitez de récompenses et de remises réservées aux membres
- Créez et accédez à une liste de vos produits
- Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
OptiPlex 5050 Tower Owner's Manual
Updating the BIOS in Windows
Prerequisites
About this task
NOTE: If BitLocker is enabled, it must be suspended prior
to updating the system BIOS, and then re-enabled after the BIOS update
is completed.
Steps
- Restart the computer.
- Go to Dell.com/support.
- Enter the Service Tag or Express Service Code and click Submit.
- ClickDetect Product and follow the instructions on screen,
- If you are unable to detect or find the Service Tag, click the Choose from all products.
- Choose
the Products category from the list.
NOTE: Choose the appropriate category to reach the product page
- Select your computer model and the Product Support page of your computer appears.
- Click Get drivers and click Drivers
and Downloads.
The Drivers and Downloads section opens.
- Click Find it myself.
- Click BIOS to view the BIOS versions.
- Identify the latest BIOS file and click Download.
- Select your preferred download method in the Please select
your download method below window, click Download
File.
The File Download window appears.
- Click Save to save the file on your computer.
- Click Run to install the updated BIOS settings
on your computer.
Follow the instructions on the screen.
Next steps
NOTE: It is recommended not
to update the BIOS version for more than 3 revisions. For example:
If you want to update the BIOS from 1.0 to 7.0, then install version
4.0 first and then install version 7.0.
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\