Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits

OptiPlex 5040 - Mini Tower Owner's Manual

PDF

Installing the system fan

  1. Hold the system fan by the sides with the cable end facing the bottom of the computer.
  2. Insert the grommets into the slots on the back of the computer.
  3. Pass the grommets through the corresponding grooves on the system fan.
  4. Stretch the grommets and slide the system fan toward the computer until it locks into place.
    • NOTE: Install the lower two grommets first.
  5. Connect the system fan cable to the connector on the system board.
  6. Close the front bezel door.
  7. Install the:
    1. bezel

    2. cover

  8. Follow the procedure in After Working Inside Your Computer .

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\