Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

OptiPlex 5040 - Mini Tower Owner's Manual

PDF

Installing the optional SSD card

  1. Remove the:
  2. Open the front bezel door.
  3. Peel the adhesive tape (blue) from the rubber.Figure displaying how to peel the adhesive tape from the rubber.
  4. Place the rubber on the system board [1] and peel the adhesive tape (pink) from the rubber [2]. Figure displaying how to place the rubber and peel the adhesive tape from the rubber.
  5. To install the SSD card:
    1. Connect the SSD card to the connector on the system board [1].
    2. Tighten the screw to secure the SSD card to the system board [2].
    Figure displaying how to install the SSD card on the computer.
  6. Close the front bezel door.
  7. Install the:
    1. bezel

    2. cover

  8. Follow the procedure in After Working Inside Your Computer .

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\