- Notes, cautions, and warnings
- Working on your computer
- Removing and
installing components
- Recommended tools
- Removing the cover
- Installing the cover
- Removing the hard drive assembly
- Removing the hard drive from the hard drive bracket
- Installing the hard drive into the hard drive bracket
- Installing the hard drive assembly
- Removing the VGA board
- Installing the VGA board
- Removing the system fan
- Installing the system fan
- Removing the memory module
- Installing the memory module
- Removing the heat sink
- Installing the heat sink
- Removing the processor
- Installing the processor
- Removing the speaker
- Installing the speaker
- Removing the coin cell battery
- Installing the coin cell battery
- Removing the system board
- Installing the system board
- System board layout
- List of compatible monitor models
- Troubleshooting your computer
- System Setup
- Specifications
- Contacting Dell
OptiPlex 3046M Owner's Manual
System Setup
System Setup
enables you to manage your computer hardware and specify BIOS level
options. From the System Setup, you can:
- Change the NVRAM settings after you add or remove hardware
- View the system hardware configuration
- Enable or disable integrated devices
- Set performance and power management thresholds
- Manage your computer security
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\