Dell Latitude 5400 Chromebook Service Manual

Installing the system board

1. Align and place the system board to the palmrest [1].
2. Replace the two (M2.5x4) screws to secure the system board to the palmrest [2].
   
3. Connect the following cables:
   1. Speaker cable [2].
   2. LED board cable [1].
   3. touchpad cable [3].
   
4. Connect the eDP cable to the connector on the system board and adhere the adhesive tape [1].
5. Replace the eDP cable bracket on the eDP cable connector on the system board [2].
6. Replace the single (M2x4) screw that secures the eDP cable bracket to the system board [3, 4].